ACC5100柴驱空压机控制器用于柴油发动机驱动的空压机,实现空压机的开机停机、数据测量、维护保养、报警保护及“三遥”功能,可根据空压机排气压力自动调节转速,控制多种电喷或非电喷柴驱空压机。
功能特点
• 5路有源继电器输出,直接输出正极和负极,15A容量无需扩展外部继电器
• 5路开关量输入口,可配置成高电平有效或低电平有效,通用性强
• 6路模拟量传感器输入,其中3路可灵活配置为电阻、电流、电压型通用接口
• DPF手动再生控制功能,支持非道路四阶段发动机
• 加热器、冷却器、燃油泵、螺杆油冷却器控制
• 实时时钟、历史记录(200条)、维护保养(10条)、ECU智能显示等功能
• CANBUS接口,对电喷发动机进行数据采集、保护和控制
• RS485接口,实现“三遥”功能
优势一:炫彩大屏,高清显示
• 3.5吋彩色液晶显示,320×240像素分辨率,带背光调节
• 液晶有智能加热功能,可满足低温-40℃条件下正常工作
• 中英俄语言可选,支持定制其它语言
• 主屏的控制器描述区可配置,支持10个字母数字或5个汉字
• 主屏模拟量显示区可配置,可显示不同的模拟量参数
优势二:高度集成,免柜体安装设计
· 面板集成电源开关、空压机双压切换开关、急停按钮开关,帮助用户节省成本
· 减少了接口与部件连接线,安装灵活,提升空间利用效率和整体美观度
· 配备防水防尘螺丝
· 急停防护罩,避免误触
优势三:可靠设计,使用无忧
· 采用插接式15A汽车保险,维护方便
· 后面板采用密封圈设计,防尘效果好,可用于恶劣场景
· 通用Type-C接口,防尘帽设计,防护等级高
· 带法兰固定接线端子,防止线束脱落
· B+、B-双接线设计,保证功率输入需求
优势四:智驭转速,随需而变
根据排气压力自动调节稳定转速。
优势五:智能控制,自动天成
负载率过高降速控制:
当负载率过高自动降速到维持转速
当负载率降低时返回额速
降速速率及延时值可调
自动待机控制:
可根据排气压力实现待机及停机的自动控制
可关联排气压力传感器及其他可编程传感器
超压自动卸载控制:
可根据排气压力实现卸载自动控制。
外形尺寸
更多产品详情请咨询众智科技各区域业务人员!期待您的选择!
众智科技,让控制更智能!
END
「 往期文章 」
Product | SmartGen ACC5100 Controller Rolled Out
ACC5100 Diesel Air Compressor Controller is used for air compressor with diesel-driven engine to realize start/stop, data measurement, maintenance, alarm protection and “Three Remotes” functions. It can automatically adjust speed based on the discharge pressure of air compressor, and control various ECU or non-ECU diesel air compressors.
Functional Features
• Five active relay outputs connect with the positive and negative directly, no need to extend external relays with 15A capacity
• Five digital inputs can be configured as active under high level or low level, which is highly flexible
• Six analog sensor inputs, three of them can be configured as general resistance/current/voltage type sensor inputs
• Manual DPF regeneration function supports non-road Stage IV engines
• Control functions of heater, cooler, fuel pump and screw oil cooler
• Real time clock, Event log (200), Maintenance (10) and ECU information display
• With CANBUS port, it can collect the data, protect and control the ECU engines
• With RS485 communication port, it can realize “Three Remotes” function
• 3.5-inch color LCD display, 320x240 pixel resolution, with adjustable backlight brightness
• Smart LCD heating system allows it to work normally under low temperature of -40°C
• Optional languages of Chinese, English and Russian, which supports custom languages
• The description bar in the controller main screen can be configured, which contains ten letters/digits, or five Chinese characters
• The analog parameter display area in the controller main screen can be configured, which can display different analog parameters
· Front panel integrates power on/off switch knob, high/low pressure switch knob, and emergency stop button to save the customer’s cost
· The connection wires between ports and components are reduced to be installed flexibly, which improves space efficiency and overall appearance
· Equipped with waterproof and dustproof screws installation
· With cover for the emergency stop button, it can avoid the touch by mistake
Advantage III: Reliable design for using safely
· It adopts 15A plug-in automotive blade fuses for easy maintenance
· Plastic sealing gasket is designed for back enclosure, which has great dustproof performance and allows it to work in extreme environment
· General Type-C port with dust cover ensures high IP level
· Connection terminals with flange structure makes the harnesses be fixed tightly
· Dual wires of B+ and B- meet the requirement of power input
Engine speed can be automatically adjusted based on the discharge pressure of air compressor
Advantage V: Smart control for high automation level
Speed down control when overloaded:
When the load rate is too high, the speed will be automatically reduced to the stable speed
When the load rate gets normal, the speed will return to the rated speed
The speed down rate and delay value can be adjusted
Auto standby control:
It can realize automatic control of standby and shutdown based on the discharge pressure
It can be correlated with discharge pressure sensor and other auxiliary sensors
Auto unload control when overpressure:
It can realize automatic control of unloading based on the discharge pressure
For more product details, please contact SmartGen business personnel in your region. Welcome your order!
SmartGen, Making Control Smarter!
END
「 Wonderful reading in the past 」
Case | Application of HEMS200 Controller in Microgrid System
www.smartgen.com.cn