众智科技新款双电源切换控制器HAT9420LT上市！
HAT9420LT由微处理器为核心构成，可精确地检测两路三相电压，对出现的电压异常(过压、欠压、缺相、过频、欠频)做出准确的判断。该装置适用市电与发电供电系统，可直接用于PC级转换开关。
其工作温度范围宽(-40℃~+70℃)，抗低温能力强，可适用于环境条件恶劣的场所。
其结构紧凑、电路先进、接线简单、可靠性高，可广泛应用于电力、邮电、石油、煤炭、冶金、铁道、市政、智能大厦等行业的电气装置、自动控制以及调试系统。
性能特点
1.LCD为132x64像素，带背光，多种语言(简体中文、英文、其它)显示，轻触按钮操作；
2.LED灯可直观显示当前ATS合分闸状态、电源状态以及负载是否有电；
3.可设置S1主用、S2主用，具有对主用电源的自投自复、自投不自复切换方式；
4.采集并显示两路三相电压、频率、相序状态；
5.采集并显示负载有功功率、无功功率、视在功率、功率因数及电流；
6.具有S1/S2独立过流警告或故障报警功能；
7.具有非重要负载NEL跳闸功能；
8.具有S1/S2累计有功电能、累计无功电能、累计合闸次数显示；
9.可测量S1、S2分相电压以及负载电流的波形畸变率和3-21奇数次谐波分量百分比；
10.具有当前持续供电时间及S1/S2累计供电时间显示；
11.具有过压、欠压、过频、欠频、缺相、逆相序功能；
12.设有自动／手动状态切换，在手动方式下，可强制开关合分闸；
13.所有参数现场可编程，采用密码验证，防止非专业人员误操作；
14.具有自定义开机界面功能；
15.现场可手动试机，进行发电机组的开停机操作；
16.具有开关重合闸及断电再扣功能；
17.合闸输出可设为脉冲或持续输出；
18.两路N线分离设计；
19.实时时钟显示，具有历史记录功能，可循环记录200条数据；
20.具有黑匣子功能，可循环记录5组ATS自动切换时的事件，每组事件记录事件发生前50秒，发生后10秒的60条详细数据；
21.具有对发电机组的定时开机/定时不开机功能，可设定单次运行、每月或者每周运行，且均可设定是否带载运行；
22.可控制两台发电机组，实现单机开机、主备开机、同时开机；
23.具有USB从机接口，方便现场调试参数；
24.具有USB主机接口，方便现场程序升级、导入配置、导出运行状态、导出历史记录、导出黑匣子记录、导出配置；
25.设有两路RS485隔离型通讯接口，应用ModBus-RTU通讯规约，具有遥控、遥测功能，可遥控两台HGM8151Z发电机组开机、停机、遥控ATS合分闸功能，读取HGM8151Z状态信息；
26.具有ETHERNET接口，应用ModBus UDP/IP通信规约，具有遥控功能，可遥控发电机组开机、停机、配置发电机组开机方式功能；
27.适合多种交流系统类型(三相四线、三相三线、单相二线、二相三线方式)；
28.可设置ATS通过主备电源供电，只要有任意一路供电电源正常，ATS即可正常工作；
控制器前面板
控制器后面板
性能参数
典型应用图
安装尺寸
更多产品详情欢迎您的垂询！
众智科技，让控制更智能！
END
往期文章
SmartGen产品 | 众智科技新款柴驱空压机控制器ACC5100上市
The new SmartGen ATS controller HAT9420LT launched!
HAT9420LT Dual Power ATS Controller is made by microprocessor as its core, which can accurately detect 2-way-3-phase voltage, make accurate judgment for occurred abnormal voltages (over/under voltage, loss of phase, over/under frequency). This controller is applicable for Mains-Gen power supply system and can be used for transfer switch of PC class. It has compact structure, advanced circuits, simple wiring and high reliability, and can be widely used in electric power, telecommunications, petroleum, coal, metallurgy, railways, municipal administration, intelligent building, electrical devices, automatic control and testing system etc.
Its working temperature range is wide (-40 ℃~+70 ℃), and it has strong resistance to low temperatures, making it suitable for places with harsh environmental conditions.
It has compact structure, advanced circuits, simple wiring and high reliability, and can be widely used in electric power, telecommunications, petroleum, coal, metallurgy, railways, municipal administration, intelligent building, electrical devices, automatic control and testing system etc.
PERFORMANCE AND CHARACTERISTICS
1.LCD LCD 132x64 pixel with backlight, multiple language display (Simplified Chinese, English, Other), push button operation;
2.LED lamp can directly display current ATS close/open status, power status and whether load is power on;
3.S1 master, or S2 master can be set; Auto Transfer Auto Restore and Auto Transfer Non Restore are fitted for master power;
4.Collect and display 2-way 3 phase voltage, frequency, and phase sequence status
5.Collect and display load active power, reactive power, apparent power, power factor and current;
6.Independent overcurrent warning or fault alarm functions for S1/S2;
7.NEL trip function is fitted;
8.Display of accumulated active power, accumulated reactive power, accumulated close times is fitted;
9.Each phase voltage of S1/S2, wave distortion rate of load current and 3-21 odd times harmonic percentage can be measured;
10.Display of current power supply time and S1/S2 continuous power supply time is available;
11.Over/under voltage, over/under frequency, loss of phase, reverse phase sequence monitoring functions are fitted;
12.Auto/Manual transfer is fitted, so that breaker can be forced to close or open in manual mode;
13.All parameters can be configured on site; password is used to verify in case of non professional wrong operation;
14.Custom start screen function is fitted;
15.Commissioning can be done manually on site to conduct genset start/stop operations;
16.Switch re-close and power-off re-close functions are fitted;
17.Close output can be set to pulse or continuous output;
18.2 circuit N wire isolated design;
19.Real time clock display, and event log function, which can record 200 data circularly;
20.Black box function, which can record 5 sets of events of ATS transfer, and 60 detailed data of 50s before one set occurs and 10s after the event;
21.Scheduled run/not run function for genset, run for once, run monthly or weekly, and run on load or unload can also be set;
22.Two gensets can be controlled and single run, master-slave run, and simutaneous run can be realized;
23.USB slave port, provides convenience for on-site debugging;
24.USB master port, provides convenience for software upgrade, configureation import, running status/event log/black box/configuration export;
25.2-way RS485 isolated communication port, makes the controller has remote control, remote measuring by ModBus-RTU; it can remote control 2 genset start/stop, ATS close and open, read the status information of HGM8151Z;
26.ETHERNET port, makes the controller has remote control function by ModBus UDP/IP; it can remote control genset start/stop, configure the genset start mode functions;
27.Suitable for multiple AC system types (3P4W, 3P3W, 1P2W, 2P3W);
28.Master and backup power supply can be set; ATS can normally work if one circuit is normal;
Controller Front Panel
Controller Back Panel
Performance Parameters
Typical Application Diagram
Case Dimensions and Cutout
More product details welcome your inquiry!
SmartGen,Making Control Smarter!
END
Wonderful reading in the past
Product | SmartGen ACC5100 Controller Rolled Out
Case | Application of HEMS200 Controller in Microgrid System
www.smartgen.com.cn
